PSA Nitrogen Gas Plant
We are Manufacturer & Exporters of High-Quality PSA Nitrogen Gas plants from India. Our PSA Nitrogen Gas Plants are of high quality working on the renowned PSA Technology & pertaining industry standards.If you are looking for pure Nitrogen, you need is to select best PSA nitrogen gas generator. Nitrogen purity in the range of 99% to 99.9999% can be achieved through our nitrogen gas generators & Plants. Our PSA nitrogen gas generator produces raw nitrogen of 99% to 99.99% purity.
Our Nitrogen Plant operating on PSA technology,
consists of twin tower system filled with special grade of carbon molecular
sieves (C.M.S.) at a time, one tower keeps in production cycle and other in
regeneration cycle. When compressed air passed through C.M.S. bed, the
molecules of oxygen, moisture & other unwanted gases are adsorbed on
surface of C.M.S. and the nitrogen which is not adsorbed by C.M.S comes out
of adsorption tower and is collected in a surge vessel.
PSA Nitrogen Gas Plant is provided, if the requirement at the discharge is
at higher pressure. Normally our PSA system can provide pressure at
discharge to about 6 kg/cm
2g but it can be increase up to higher
pressure of 150 kg/cm
2g based on client's requirement. for this
we need additional booster, suction pot and finned cooler after the surge
vessel so as to enhanced the pressure up to higher pressure before storage
tank. Rest of the principle is same as ms model.
Purity of Nitrogen : If you want pure Nitrogen, you need is to
select best PSA nitrogen gas generator. Nitrogen purity in the range of 99%
to 99.9999% can be achieved through our nitrogen gas generators. Our PSA
nitrogen gas generator produces raw nitrogen of 99% to 99.99% purity. By
adding purification modules to this unit, nitrogen of 99.9999% purity can be
achieved.
Following are the generator models to produce different nitrogen
purities :
PSA Nitrogen Gas Plant (MS Model)
Leading
manufacturer, supplier, and exporter dealing in premium quality PSA Nitrogen Gas Plant (MS Model).
Our Nitrogen Plant/Generator operating on PSA technology, consists of twin
tower system filled with special grade of carbon molecular sieves (C.M.S.)
at a time, one tower keeps in production cycle and other in regeneration
cycle. When compressed air passed through C.M.S. bed, the molecules of
oxygen, moisture & other unwanted gases are adsorbed on surface of
C.M.S. And the nitrogen which is not adsorbed by C.M.S comes out of
adsorption tower and is collected in a surge vessel. For continuous
generation of nitrogen, two adsorption towers are provided which are
interconnected with auto change over valves controlled by a sequence
programmer. When one tower saturates with oxygen the process automatically
changes over to another tower and thus the nitrogen production is
continuous. This model is the simplest to produce nitrogen of a purity in
range from 95% to 99% purity. However, if carbon molecular sieves quantity
is increased, even 99.999% purity nitrogen can be produced from this model.
But running cost would be higher in case of higher purity. Thus, this model
is recommended for purity up to 99.99% only. This model is generally used to
purging or Inserting applications.
It turns classified into two categories :
- MS-L
- MS-H
- MS-L GAS COMPOSITION
| Flow Rate |
1-1000 Nm3 / hr |
| Nitrogen |
98-99.99% |
| Oxygen |
0.01% |
| Hydrogen |
Nil |
| Dew Point |
(-)40oC to (-)80oC |
APPLICATIONS : As Inert gas in Chemical Industries, Food &
Pharmaceutical Industries, For fire control in Coal mines etc.
|
 |
| Nitrogen |
99.5-99.999% |
| Oxygen |
10 ppm- 500 ppm |
| Hydrogen |
Nil |
| Dew Point |
(-)60oC to (-)80oC |
APPLICATIONS : As Inert gas in Chemical, Food Pharmaceutical
Industries, Heat Treatment Furnaces, Electronic, Synthetic Fiber,
Industries.
|
PSA Nitrogen Gas Plant (Deoxo Model)
Manufacturer and Exporter of PSA Nitrogen Gas Plant (Deoxo Model).
This model is commonly used in metallurgical industries for providing oxygen
free nitrogen for heat treatment furnaces. Here, the oxygen is less than
1-ppm and but hydrogen is around 0.5 to 1% which is desirable as reducing
constituent in most of heat treatment applications. “MS” models
can also be converted into “DX” model by adding palladium deoxo
reactor and Gas Drying Unit. “DX” model is also applicable in
chemical as well electronic industries.
Gas Composition :
| Flow Rate |
1-1000 Nm3 / hr |
| Nitrogen |
99.9999% |
| Oxygen |
1 to 3 ppm(max) |
| Hydrogen |
0.5% or more |
| Dew Point |
(-)40oC to (-)80oC |
APPLICATIONS : As Inert gas in Chemical & Pharmaceutical
Industries. In applications where oxygen impurity is not acceptable.
PSA Nitrogen Gas Plant (Cu-Deoxo Model)
PSA Nitrogen Gas Plant (Cu-Deoxo Model) contains an extra nitrogen
purification module based on copper deoxo catalyst. This model finds
application in synthetic fiber, optical cables & electronic industries.
Running cost of this unit is slightly higher because it produces very pure
nitrogen gas i.e free from oxygen and hydrogen as well. It is applicable
where hydrogen contents are detrimental to the process.
Gas Composition :
| Flow Rate |
1-500 Nm3 / hr |
| Nitrogen |
99.9999% |
| Oxygen |
1 ppm (max) |
| Hydrogen |
Nil |
| Dew Point |
(-)40oC to (-)80oC |
APPLICATIONS : - As Inert gas in Electronic, Synthetic Fiber and
Hi-tech Industries where one needs Ultra High Purity.
Nitrogen Plant With Booster Model
Ask for Price
Such
kind of Nitrogen Plant with booster is provided, if the requirement at the
discharge is at higher pressure. Normally our PSA system can provide
pressure at discharge to about 6 kg/cm
2g but it can be increase
up to higher pressure of 10-150 kg/cm
2g based on client's
requirement. for this we need additional booster, suction pot and finned
cooler after the surge vessel so as to enhanced the pressure up to higher
pressure before storage tank. Rest of the principle is same as ms model.
Lab Scale Nitrogen Plant Model
Ask for Price
Sam
Gas Projects Pvt. Ltd. is a leading manufacturer and supplier of Lab Scale
Nitrogen Plant. We combine top-quality components with skilled workmanship
to ensure the highest possible performance level of every nitrogen gas
generator we manufacture. This combination means that our nitrogen gas
generators provide a highly reliable solution to your laboratory gas
requirements. All of our nitrogen generators have been tried, tested and
approved worldwide. We have become the industry’s number one choice for
gas generation. Our lab scale nitrogen plant produce flows up to 100 L/min
and purity unto 99.999% at a pressure 100 psi. These generators can use an
existing air supply or be fitted with a dedicated compressor. These nitrogen
generators are specifically designed for laboratory use. They produce
essential nitrogen gas used in medical or laboratory purposes. Our lab scale
nitrogen generators are great in demand. We manufacture as well supply our
nitrogen generators to the domestic market and far off countries. Few
features of our lab scale nitrogen generators are given herein:
- The units are designed to get under a bench top
- Nitrogen generators are efficient in continuous nitrogen supply
- Secure and reliable
- Compact and sophisticated in design
- Easy to operate
- Reduce storage cost
- Minimize support and maintenance
| Flow rate |
5 to 100 liter/minute |
| N2 purity |
95% to 99.9999 % |
| Pressure |
Standard |
| Dew point |
Up to (-60)oC |
©
Sam Gas Projects Pvt. Ltd. All Rights Reserved (Terms
of Use)
